GAJ Industrial Supply
Categories
 
Home » Motors » Three Phase Motor » Three Phase F Class Motors » 6 Pole F Class Motors » TVF 056

Suguna - TVF 056/0.5
6 Pole F Class Motors [Model - TVF 056]


 
Stock Available
Original Price      :Rs. 6,290.00
GAJ Price    :Rs. 6,038.40

 View Larger Image   Write a Review


Description
  • Casting for body frame, end shields, hearing shields etc., are made out of quality graded grey iron castings which assures long years of utility.
  • Shaft - EN 8 Steel / Rotors - Pressure die cast and dynamically balanced / Stator core pack - built from low loss electrical grade steel laminations / The stator winding consists of polyester base insulated copper wire to give high conductivity and impregnated with synthetic resins to attain high die electric properties / Windings are tested on surge comparison tester. * The body has been provided with greater number of parallel ribs to ensure ruggedness and also better heat dissipation.
  • Pressure die cast aluminium body for frames 56 to 100.
  • All motors are painted with rust proof epoxy paint.
  • Prompt after sales service

 

tab_bottom

Specifications
  • Synchronous A.C. Voltage 240 & 415
  • Frequency 50 Hz (non standard voltage and frequency on request)
  • Three phase and single phase winding
  • Squirrel cage rotor
  • Insulation class 'B' / class 'F'
  • Performance as per IS 325, IS 12615 for 3 phase and IS 996 for single phase motors.
  • 600 / 450 RPM in 3 phase also available.
  • 2 pole and 8 pole motors can be supplied on request
  • Aluminum frame motors

 

Product Weight Package Length Package Breadth Package Height
24.00Kgs 362.00mm 318.00mm 254.00mm
tab_bottom

Applications
  • Casting for body frame, end shields, hearing shields etc., are made out of quality graded grey iron castings which assures long years of utility.
  • Shaft - EN 8 Steel / Rotors - Pressure die cast and dynamically balanced / Stator core pack - built from low loss electrical grade steel laminations / The stator winding consists of polyester base insulated copper wire to give high conductivity and impregnated with synthetic resins to attain high die electric properties / Windings are tested on surge comparison tester. * The body has been provided with greater number of parallel ribs to ensure ruggedness and also better heat dissipation.
  • Pressure die cast aluminium body for frames 56 to 100.
  • All motors are painted with rust proof epoxy paint.
  • Prompt after sales service

 

tab_bottom

Brand HPTypeFrame Size
Suguna 0.5TVF 05680